1/4 inch X 2 inch Tension Pin

  • Model: TPIN2
  • Shipping Weight: 0.025lbs
  • 45 Units in Stock

$2.50

Add to Cart:

Catalog Number TPIN2
SOLD BY THE PAIR


These Split, Tension, Roll Pins as they are called are used in instances where you may have a damaged 1/4 inch solid axle holding your wheel in your door bottom frame or in an actual aluminum roller housing. These pins drive through your bottom rail or roller housing to act as an axle for the actual wheel. These pins are 1/4 inch X 2 inches and after driving the new axle pin in you simply cut off the excess with a dremel cut off wheel or similar. The 2 inch length is so you can hold and control the pin while driving it in. Usually you should use 1 pin per wheel and throw away the excess piece.



LOCATION R1 B46


This product was added to our catalog on Friday 16 March, 2018.

Your IP Address is: 54.162.121.80
Copyright © 2018 Sliding Glass Door Parts